Products
Model 2700 Controller

Model 2700 Accessory Ordering Table

cable diagram The table below lists the accessories recommended for each of the 2700's modules. Ports on each module are designated by the letters A, B, C, D, E, F, starting with "A" for the first port at the top of the faceplate and continuing on down for all other ports present on that faceplate. Example: the 2206-2's third port from the top of the faceplate is port C. It is a stepper (pulse/direction signals) port and it requires a cable whose part number is 2287. Terminal blocks are only applicable to ports A and B on selected modules and are not listed for any other ports. Port types:
DI= Digital Input
DO= Digital Output
DedIn= Dedicated Input
Step= Stepper (pulse/direction output)
AI= Analog Input
AO= Analog Output
Cmd= Command
Enc= Encoder
Signal= Signal
Ser(2)= RS-232 splitter
Dist Block= Distribution block

Module #
Module Desc.
Connec-
tor Kit 1
Cable A
TB A
Cable B
TB B
Cable C
Cable D
Cable E
Cable F
2201 32 Channel Input Module 2251 DI
2276		 23762 - - - - - -
2202A 24 Channel Output
Module		 2252 DO (16)
2275 		23752 DO (8)
2275 		23752 - - - -
2203 16In/
16Out Module 		2253 DI
2276 		23762 DO
2275 		23752 - - - -
2203
SRC 		16In/
16Out Module		 2253 DI
2276 		- DO
2275 		- - - - -
2206-1 Single Axis Stepper Module 2256-1 DedIn
2270 		- Step
2287 		- - - - -
2206-2 Dual Axis Stepper Module 2256-2 DedIn
2270 		- DedIn
2270 		- Step
2287 		Step
2287 		- -
2207
(all
models) 		16 Channel Analog Input Module 2257 AI
2278 		- - - - - - -
2209 Analog Output Module 2259 AO
2279 		- - - - - - -
2210, 2211, 2212 AC I/O - Relay
Output Module		 N/A Front pluggable terminal block included with module
2219
-1.5,
1CF 		Single Axis
Servo Control Module 1.5 or Cam following		 2269-1 Cmd
2289C 		- Enc
2289E 		- DedIn
2289L 		- - -
2219-2 Dual Axis Servo Control Module 2269-2 Cmd
2289C		 - Cmd
2289C		 - Enc
2289E 		Enc
2289E 		DedIn
2289L 		DedIn
2289L
2220 (pigtail cables) Analog I/O Module 2260 DO
2273 		- AI/AO
2280 		- - - - -
2220 Analog I/O Module (thermo-
couple configura-
tion)		 N/A AO
2331 		2334(J or K) or 2335 (J, K, or -) Signal
2332 		- - - - -
2221 32 Channel Output Module 2252 DO
2275 		  DO
2275 		23752 - - - -
2703AP 2700AP CPU - - Ser(2)
2886 		Dist Block
2346-CBL 		Dist Block
2346 		- - - -
2719 Dual Axis Servo Control Module - 2345-CBL 2345 - - - - - -
2720 (pigtail cables) Analog I/O Module 2260
(2 req'd)		 AI/AO
2280 		- AI/AO
2280 		- - - - -
2720 Analog I/O Module - AO
2331 		Dist Block
2335		 AO
2331 		Dist Block
2335 		- - - -
Note 1. Connector kits contain enough mating connectors and pins for the entire module.
Note 2. Terminal block and cable set.