Products
Model 2700 Controller

Standard Analog I/O Control
For advanced analog I/O modules, click here.

Model 2207 16 Channel Analog Input Module (0-10 VDC 1 part in 1000; 4-20 mA 1 part in 160)
Model 2207A 16 Channel Analog Input Module (0-10 VDC 1 part in 1000; 4-20 mA 1 part in 800)
Model 2207B 16 Channel Analog Input Module (0-10 VDC 1 part in 1000; 4-20 mA 1 part in 350)
Model 2209 Analog Output Module (±10 VDC 1 part in 4096)

Model 2207, 2207A, 2207B Module Specifications

Absolute Maximum Ratings	Min	Typ	Max
Applied Input voltage-Note 1	0 VDC		27.0 VDC
Power supply capacity (±15 VDC)			100 mA
Reference output current (10.00 V)			26 mA
Reference voltage
Nominal output voltage		+10.000 VDC
Accuracy		±4.88 mV	±9.76 mV
Analog Input Specifications
Input characteristics - normal mode
Nominal sensing range	0 VDC		+10 VDC
Resolution		0.01 VDC
Accuracy		±0.01 VDC	±0.03 VDC
Input current		0.01 μA	1.0 μA
Input characteristics -differential mode
Common-mode voltage range	0 VDC		6.00 VDC
Nominal gain range	280		575
Input offset voltage adjust.		±4.5 mV
Input impedance		10 kΩ

Note 1. Application of a negative voltage will result in erroneous readings.

Model 2209 Module Specifications

Absolute Maximum Ratings	Min	Typ	Max
Output load resistance	2 kΩ
Power supply capacity (±15 VDC)- Note 1			60 mA
Power supply capacity (+10.000 VDC)			100 μA
Analog Input Specifications
Analog voltage ranges
Unipolar, 10 V span	0.000 VDC		+10.000 VDC
Bipolar, 10 V span	-5.000 VDC		+5.00 VDC
Bipolar, 20 V span	-10.000 VDC		+10.000 VDC
Output resolution
10 V span setting		2.44 mV
20 V span setting		4.88 mV
Output accuracy
10 V span setting		±2.44 mV mV
20 V span setting		±4.88 mV
Power supply output
Negative supply voltage	-15.75 VDC		-14.25 VDC
Positive supply voltage	+14.25 VDC		+15.75 VDC
Reference output voltage	9.900 VDC		10.100 VDC

Note 1. The external capacity of the on-board ±15 volt supply must be reduced by the amount drawn from the analog outputs.