Blue Fusion Model 5200 Controller for Web Enabled Automation

main product page

CONTROLLERS

MODULES

for 5200:

for 5100:

for 2700:

configuration and accessories

USER INTERFACES

SOFTWARE

ACCESSORIES

analog interface module

Products
Programmable Automation Controllers

Blue Fusion: Model 5200 Controller
Features

System Resources

CPU: high-speed 32-bit RISC processor

In addition to the main CPU, most 5200 modules feature additional on-board processors.

Industrial real-time deterministic OS
Real-time clock: automate SNTP network synchronization

User Memory

Flash file system: 1 MB; non-volatile program and data storage
Non-volatile RAM drive: 1.5 MB
Expandable with optional memory cards to 16 MB

Active Program Resources

4,500 non-volatile registers
32,768-element data table
84 simultaneous tasks

Encoder and High Speed Counters

Quadrature encoder input (6 MHz)
Dual high speed counters (6 MHz)

Analog I/O (max 48 channels)*

Voltage, current and thermocouple
PID loop control

Digital I/O (max 48 channels)*

Hardware counters 10 KHz/channel
Supports 16 PLS outputs. Actuation rate < 1 msec
Optional quadrature encoder input with 32-bit counter and 2 high-speed (1 μsecond response) registration inputs

Motion Control

Stepper
- Velocity range: 0 - 1 M steps/sec
- Accuracy: ±1 step
Servo
- Position loop rate: 500 μsec/axis
- Velocity range: 0 - 6 Mcounts/sec
- Accuracy: ±1 count

Serial Communications

Two serial COM ports (115 Kbaud)
RS-232 (standard)
RS-485 (optional)
Supports wired and wireless networking
Modbus master/slave (ASCII or RTU)

Ethernet Communications

10/100 baseT Ethernet full duplex with DMA and flow control
Supports wired and wireless networking
UDP, TCP/IP, HTTP
ARP, ICMP
Modbus master/slave (RTU)
FTP file server
Telnet server
HTTP server
Raw socket support
SNTP time synchronization
DHCP support

Web Server

Monitor and control devices via standard browser
Built-in web pages allow controller to be fully configured and monitored with only a standard web browser
Supports standard HTTP and XML interface

HMI Integration

Fully integrated Ethernet support for CTC's iPanel™ touchscreens
Serial support for other touchscreens

Data Logging

Local data logging to internal non-volatile RAM disk
Automatic integration with CTC's CTLog software
Standard memory stores 384,000 values; expandable to 3 million values

Environmental

Operating temperature: 0 - 50°C (horizontal installation)
Storage temperature: -40 - 85°C
Relative humidity: 5 - 95% non-condensing

*Maximums are per controller and are not necessarily mutually inclusive.

search products company customer care contact us
site map partners press room

Copyright © 2003 - 2008 Control Technology Corp. All Rights Reserved.
Quickstep™, QuickBuilder™, Blue Fusion™, CTServer™, WebMon™, iPanel™, CT HMI™, and CT webHMI™ are trademarks of Control Technology Corp. Java and the Java Coffee Cup Logo are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other trademarks are the properties of their respective organizations.

Phone numbers:
Sales & Order Entry: 888.818.2600 Tech Support: 800.282.5008 Other: 508.435.9595 Fax: 508.435.2373
Address: 25 South Street, Hopkinton, MA 01748

Last site update May, 2008